Common troubleshooting of outdoor jacuzzi
Outdoor spa is not energized or the leakage protection switch is tripped: The first cause of the fault of the massage bathtub is the poor contact of the power cord, and the leakage switch is powered off. The outdoor spa repair method is to check, eliminate the poor contact, and turn on the power; the second The reason is that there is leakage or grounding on the power supply and circuit. The repair method of the bathtub is to measure the power supply, the circuit and the grounding wire to eliminate the leakage and grounding.
2. The massage hydraulic power cannot be adjusted: the first reason is that the suction power of the water pump is not enough, the repair method is to check whether the water pump is in good condition; the second reason is that the air regulating valve is abnormal, the repair method is to replace the air regulating valve; the third reason is the nozzle Clogged, the repair method is to remove debris from the nozzle.
3. The control panel does not start: The first reason is that the power cord is not connected properly and the leakage switch is disconnected. The repair method is to check the power cord and reconnect it; the second reason is that the control panel switch fails. The repair method is to replace the panel.
We accept ODM and OEM.
Our products can be placed on the floor or installed in the ground.
The more products you want, the more affordable the price.
Please contact us if you have any problems.