Low price 1 lounge 4 seats outdoor hot tub spa
Our products can be placed on the floor or installed in the ground.
The more products you want, the more affordable the price.
Please contact us if you have any problems.
Seating | 1 lounge & 4 seats |
Shell colors | 7 colors for options |
Shell material | US Aristech Acrylic |
Circulation Pump | 1*0.35HP (WTC50) |
Jet pump | 1*3HP (LP300) |
Product dimension | 2200*2200*880mm |
Air valve | 2pcs |
Diverter valve | 1pcs |
Suction | 2pcs |
Pillow | 3pcs |
Drainage outlet | Aluminium (40mm*20mm) |
Skirt | PS(optional colors) |
Shell insulation | 2 cm |
Base | ABS with PVC |
Control system | Balboa BP200G2 + TP500S +3kw heater |
Power supply | 220V/380V/110V |
Underwater lighting | 1pcs |
Total Jets | 45pcs |
Filter | 1*100sf |
UV sterilizer | 1pcs |
Make an inspection
Put the outdoor bathtub in a relatively
spacious place and check whether the surface is intact. All kinds of
spare parts should be readily available, and each nozzle should be
bright and fastened. The quality of the motor is closely related to the
use effect of the outdoor massage bathtub, so it is necessary to pay
special attention to its installation, piping and quality.
2. Pay attention to waterproof
Before
going to the designated location, waterproof the parts that are prone
to water leakage with silica gel. Connect the connectable parts first,
so as not to be inconvenient for installation after being placed in the
designated position. The waterproofing of the parts must be done well,
especially the connection between the drain and the motor water pipe is
very critical.
3. Fixed position
Place the outdoor
jacuzzi at the designated location. If you are in a bathroom with a
small space, avoid excessive tilting or bumping of the cylinder. Put the
drain pipe into the pipe and make sure that the water is unblocked.
After the cylinder body is placed, the anchor screws should be adjusted
continuously, so that all the screws are safely on the ground to ensure
the overall level.
4. Secure connection
After
connecting the plug, make waterproof around the electrical connection
board to avoid leakage accidents. After the inspection, there is no
abnormal situation, and the hot and cold water pipes can be connected in
place. Before connecting the water pipe, do a power-on test of the
motor to check whether the sound meets the requirements. If not, rework
immediately.
5. Detection function
After making the
connection, put the outdoor jacuzzi completely, and adjust the level
again. Turn on the water and electricity, check all the functions, and
solve the problems in time. The surfing effect of the bathtub should be
checked. The flushing force, the sound of the motor, and the presence or
absence of foreign objects are the main contents of the inspection.
6. Protect the finished product
Drain
the water in the tank and wipe clean the remaining water droplets at
the bottom of the tank and the spray hole to prevent the bathtub from
rusting at the spray hole due to long periods of inactivity.